sftp interactive mode in LynxOS

[hari sekar]

 --- Markus Friedl <markus at openbsd.org> wrote: > 
> what does
> 	ssh -2 host /path/to/sftp-server
> say? 

  Yes. I've tried this before, but the client just
hangs, and after a series of "enter" keys, prints 
"bad message"
and exits.

 Iam attaching the debug messages for this too!



lynxos$ ssh -2 -v hari at linux
/usr/local/libexec/sftp-server
OpenSSH_2.9p2, SSH protocols 1.5/2.0, OpenSSL
0x0090600f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Seeding random number generator
debug1: Rhosts Authentication disabled, originating
port will not be trusted.
debug1: restore_uid
debug1: ssh_connect: getuid 7 geteuid 7 anon 1
debug1: Connecting to hari [192.168.0.126] port 22.
debug1: temporarily_use_uid: 7/2 (e=7)
debug1: restore_uid
debug1: temporarily_use_uid: 7/2 (e=7)
debug1: restore_uid
debug1: Connection established.
debug1: identity file /home/hari/.ssh/id_rsa type -1
debug1: identity file /home/hari/.ssh/id_dsa type 2
debug1: Remote protocol version 1.99, remote software
version OpenSSH_2.9p2
debug1: match: OpenSSH_2.9p2 pat ^OpenSSH
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_2.9p2
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 126/256
debug1: bits set: 1037/2049
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'hari' is known and matches the RSA host
key.
debug1: Found key in /home/hari/.ssh/known_hosts2:5
debug1: bits set: 1054/2049
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue:
publickey,password,keyboard-interactive
debug1: next auth method to try is publickey
debug1: try privkey: /home/hari/.ssh/id_rsa
debug1: try pubkey: /home/hari/.ssh/id_dsa
debug1: authentications that can continue:
publickey,password,keyboard-interactive
debug1: next auth method to try is password
hari at hari's password:
debug1: ssh-userauth2 successful: method password
debug1: channel 0: new [client-session]
debug1: channel_new: 0
debug1: send channel open 0
debug1: Entering interactive session.
debug1: client_init id 0 arg 0
debug1: Sending command:
/usr/local/libexec/sftp-server
debug1: channel 0: open confirm rwindow 0 rmax 16384

<just hangs>
<after a series of "enter" keys>

debug1: client_input_channel_req: channel 0 rtype
exit-status reply 0
debug1: channel 0: rcvd eof
debug1: channel 0: output open -> drain
debug1: channel 0: rcvd close
debug1: channel 0: input open -> closed
debug1: channel 0: close_read
debug1: channel 0: obuf empty
debug1: channel 0: output drain -> closed
debug1: channel 0: close_write
bad message
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel_free: channel 0: status: The following
connections are open:
  #0 client-session (t4 r0 i8/0 o128/0 fd -1/-1)

debug1: channel_free: channel 0: dettaching channel
user
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes
in 238.4 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0,
stderr 0.0
debug1: Exit status 11
lynxos$



___________________________________________________________________
*NEW*   Yahoo! Messenger for SMS. Now on your ORANGE phone    *NEW*
        Visit http://in.mobile.yahoo.com/smsmgr_signin.html