X user application fails come up but xclock and xterm come up

[Raju, Narendra]

Hi ,

   I open secure Session with X11 forwarding. when run any standard X
applicattion like xterm xclock
it come up without any error. I start my user X application it fails. On
User application side it fails when
"xtOpenDisplay" system call with localhost:10.0.

On SSH server debug message are :

> debug1: X11 connection requested.
> debug2: fd 20 setting TCP_NODELAY
> debug2: fd 20 is O_NONBLOCK
> debug2: fd 20 is O_NONBLOCK
> debug1: channel 3: new [X11 connection from 127.0.0.1 port 47773]
> debug1: channel 3: open confirm rwindow 3000 rmax 35840
> debug1: server_input_channel_req: channel 3 request exit-status reply 0
> debug1: session_by_channel: unknown channel 3
> debug1: dump: used 1 session 0 2001c300 channel 0 pid 80374
> debug1: dump: used 0 session 0 2001c398 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c430 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c4c8 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c560 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c5f8 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c690 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c728 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c7c0 channel 0 pid 0
> debug1: dump: used 0 session 0 2001c858 channel 0 pid 0
> session_input_channel_req: no session 3 req exit-status
> debug1: channel 3: rcvd close
> debug1: channel 3: output open -> drain
> debug1: channel 3: close_read
> debug1: channel 3: input open -> closed
> debug3: channel 3: will not send data after close
> debug1: channel 3: obuf empty
> debug1: channel 3: close_write
> debug1: channel 3: output drain -> closed
> debug1: channel 3: send close
> debug1: channel 3: is dead
> debug1: channel 3: garbage collecting
> debug1: channel_free: channel 3: X11 connection from 127.0.0.1 port 47773,
> nchan
> nels 5
> debug3: channel_free: status: The following connections are open:\015
>   #0 server-session (t4 r0 i0/0 o0/0 fd 16/15)\015
>   #2 X11 connection from 127.0.0.1 port 47764 (t4 r1 i0/0 o0/0 fd
> 18/18)\015
>   #3 X11 connection from 127.0.0.1 port 47773 (t4 r7 i3/0 o3/0 fd
> 20/20)\015
>   #4 X11 connection from 127.0.0.1 port 47766 (t4 r3 i0/0 o0/0 fd 21/21)
> 
> 
> 
> 
> xClock  debug on SSH server
> 
> debug2: channel 4: rcvd adjust 3000
> debug2: channel 2: rcvd adjust 3000
> debug1: X11 connection requested.
> debug2: fd 20 setting TCP_NODELAY
> debug2: fd 20 is O_NONBLOCK
> debug2: fd 20 is O_NONBLOCK
> debug1: channel 3: new [X11 connection from 127.0.0.1 port 47828]
> debug1: channel 3: open confirm rwindow 3000 rmax 35840
> debug2: channel 2: rcvd adjust 3000
> 
	Thank you for your help 
	[Raju, Narendra]