3.8p1 password expiry, Solaris 8

Fri Mar 19 09:49:30 EST 2004

I can't seem to get the /etc/shadow password expiry working on
3.8p1 on Solaris 8. It works fine with 3.7.1p2 and pwexp26.
Logins aren't affected after a 'passwd -df' or 'passwd -f'.

Here's the configure, using gcc 3.2:
--prefix=/usr --sysconfdir=/etc/ssh --with-tcp-wrappers \
--without-pam --libexecdir=/usr/sbin --mandir=/usr/share/man \
--with-shadow

'uname -a' output:
SunOS tech04 5.8 Generic_108528-24 sun4u sparc SUNW,UltraAX-i2

'ssh -V':
OpenSSH_3.8.p1-pwexp26, SSH protocols 1.5/2.0, OpenSSL 0.9.7c 30 Sep 2003

'ssh -vvv <host>' output:

OpenSSH_3.7.1p2, SSH protocols 1.5/2.0, OpenSSL 0.9.7c 30 Sep 2003
debug1: Reading configuration data /etc/ssh/ssh_config
debug3: cipher ok: blowfish-cbc [blowfish-cbc]
debug3: ciphers ok: [blowfish-cbc]
debug2: ssh_connect: needpriv 0
debug1: Connecting to tech04 [172.21.2.140] port 22.
debug1: Connection established.
debug1: identity file /home/kevin/.ssh/identity type -1
debug1: identity file /home/kevin/.ssh/id_rsa type -1
debug3: Not a RSA1 key file /home/kevin/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type 'Proc-Type:'
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type 'DEK-Info:'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/kevin/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8p1-pwexp26
debug1: match: OpenSSH_3.8p1-pwexp26 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.7.1p2
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: blowfish-cbc
debug2: kex_parse_kexinit: blowfish-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_init: found hmac-md5
debug1: kex: server->client blowfish-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server blowfish-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 130/256
debug2: bits set: 1599/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/kevin/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 65
debug3: check_host_in_hostfile: filename /home/kevin/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 65
debug1: Host 'tech04' is known and matches the RSA host key.
debug1: Found key in /home/kevin/.ssh/known_hosts:65
debug2: bits set: 1586/3191
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/kevin/.ssh/id_dsa (0x808e580)
debug2: key: /home/kevin/.ssh/identity ((nil))
debug2: key: /home/kevin/.ssh/id_rsa ((nil))
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/kevin/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 434
debug2: input_userauth_pk_ok: fp b2:6f:21:29:25:46:cf:04:0d:c6:18:d4:20:77:71:18
debug3: sign_and_send_pubkey
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: ssh_session2_setup: id 0
debug2: channel 0: request pty-req
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 8
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 0
debug3: tty_make_modes: 7 0
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 1
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 37 0
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 0
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 1
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 52 0
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 1
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 0
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 71 0
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug2: x11_get_proto: /usr/X11R6/bin/xauth list :0.0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req
debug1: Requesting authentication agent forwarding.
debug2: channel 0: request auth-agent-req at openssh.com
debug2: channel 0: request shell
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Thu Mar 18 16:32:16 2004 from 2k144158
Sun Microsystems Inc.   SunOS 5.8       Generic Patch   October 2001
tech04 /export/home/kevin >exit
logout
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
  #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1)

debug3: channel 0: close_fds r -1 w -1 e 6
Connection to tech04 closed.
debug1: Transferred: stdin 0, stdout 0, stderr 30 bytes in 1.6 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 18.9
debug1: Exit status 0

Contents of /etc/ssh/sshd_config:

#	$OpenBSD: sshd_config,v 1.65 2003/08/28 12:54:34 markus Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
Protocol 2
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
KeyRegenerationInterval 1800
#ServerKeyBits 768
ServerKeyBits 1024

# Logging
#obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
LoginGraceTime 60
#PermitRootLogin yes
PermitRootLogin without-password
#StrictModes yes

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile	.ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
IgnoreUserKnownHosts yes
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCreds yes

# Set this to 'yes' to enable PAM authentication (via challenge-response)
# and session processing. Depending on your PAM configuration, this may
# bypass the setting of 'PasswordAuthentication'
#UsePAM yes

#AllowTcpForwarding yes
#GatewayPorts no
GatewayPorts yes
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#KeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression yes
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
MaxStartups 20

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem	sftp	/usr/sbin/sftp-server

---