[flashboot] New release on it's way..

Alexander Marx mad-ml at madness.at
Fri Jan 12 08:17:24 EST 2007

Rickard Dahlstrand wrote:
> hifn added about 200k to the wrap12 kernel, which is OK i guess. Can you
> download and try http://www.tilde.se/flashboot/download/4.0/bsd.wrap12.beta
> Note that this release is not tested in any way and that it uses a 9600
> conspeed.

ok, just gave it a quick run .. looks good so far!

the hifn card is successfuly found and isakmpd/ipsec seems to
"like" it .. ;)

many thanks,

dmesg follows:

OpenBSD 4.0 (WRAP12) #0: Thu Jan 11 16:23:12 CET 2007
    root at dnsmon2.iis.se:/home/rd/flashboot/flashboot/obj/WRAP12
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
 267 MHz
cpu0: TSC disabled
real mem  = 133791744 (130656K)
avail mem = 108392448 (105852K)
using 331 buffers containing 1355776 bytes (1324K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(de) BIOS, date 05/21/05, BIOS32 rev. 0 @ 0xfc5f2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
hifn0 at pci0 dev 13 function 0 "Hifn 7955/7954" rev 0x00: LZS 3DES ARC4
1 RNG AES PK, 32KB dram, irq 12
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq
10, a
ddress 00:0d:b9:03:4c:38
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 15 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq
9, ad
dress 00:0d:b9:03:4c:39
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 16 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq
11, a
ddress 00:0d:b9:03:4c:3a
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
gpio0 at gscpcib0: 64 pins
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0
 to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi XXM2.3.0>
wd0: 1-sector PIO, LBA, 244MB, 500400 sectors
wd0(pciide0:0:0): using PIO mode 1
"NS SCx200 AUDIO" rev 0x00 at pci0 dev 18 function 3 not configured
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6
revision 3
wdstatus 0
isa0 at gscpcib0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
gscsio0 at isa0 port 0x2e/2: SC1100 SIO rev 1: ACB1 ACB2
iic0 at gscsio0
iic1 at gscsio0
lmtemp0 at iic1 addr 0x48: lm77
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask e1ef netmask ffef ttymask ffef
rd0: fixed, 30720 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
clock: unknown CMOS layout
pppoe0: received unexpected PADO

More information about the flashboot mailing list