[flashboot] Still searching for a stable OpenBSD 4.3 and flasboot branch.

[Jason George]

On Thu, 10 Apr 2008, Stuart Henderson wrote:

> On 2008/04/10 10:02, Sutherland Russell wrote:
>>
>> On Apr 10, 2008, at 9:57, Stuart Henderson wrote:
>>
>>> On 2008/04/10 09:49, Russell Sutherland wrote:
>>>> I failed again today to get a fresh OpenBSD 4.3 source tree
>>>> (using cvsup):
>>>
>>> What about the system you're building on, is that also near
>>> enough 4.3? (i.e. filesets from around March 12 or so)
>>>
>>
>> I am building on a OpenBSD 4.3 system:
>>
>> bureau10# dmesg | more
>> OpenBSD 4.3-current (GENERIC) #736: Fri Apr  4 17:28:40 MDT 2008
>>     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>
> That may be too new, -current is past 4.3 now, I'm not sure if you
> can reliably build 4.3 on it.

I can build flashboot using the April 9 snapshot on the build machine 
along with a checkout of the April 9 current source tree.  Something must 
have become slightly de-synchronized with the sources and builds in the 
time period that Russell and I tried and failed to get things working.

build system:
OpenBSD 4.3-current (GENERIC) #799: Wed Apr  9 12:04:26 MDT 2008
     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC

target system:
OpenBSD 4.3-current (SOEKRIS4801) #0: Thu Apr 10 11:30:03 MDT 2008

jbg at embedded:/v00/embedded/flashboot-20080410/obj/SOEKRIS4801
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 133787648 (127MB)
avail mem = 109588480 (104MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/40/21, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 
10, address 00:00:24:c3:5c:bc
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 
10, address 00:00:24:c3:5c:bd
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 
10, address 00:00:24:c3:5c:be
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
ral0 at pci0 dev 14 function 0 "Ralink RT2560" rev 0x01: irq 11, address 
00:11:09:0b:86:0d
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi Flash Card>
wd0: 1-sector PIO, LBA, 122MB, 250368 sectors
wd0(pciide0:0:0): using PIO mode 2
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 
revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5, 
version 1.0, legacy support
isa0 at pcib0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio0 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Compaq OHCI root hub" rev 1.00/1.00 addr 1
biomask f3e5 netmask ffe5 ttymask ffe7
rd0: fixed, 30720 blocks
root on rd0a swap on rd0b dump on rd0b