[flashboot] Booting with 5.0 image

[Johan Ryberg]

Is that everything that happens? No more output?

//Johan
Den 31 jan 2012 12:36 skrev "Eric Boudrand" <eric.boudrand at caramail.com>:

> Hi,
>
> I have tested SOEKRIS4521-50.image on a Soekris NET4511. The boot
> sequence failed with this log :
>
> boot>
> booting hd0a:/bsd: 53407060+463132 [61+127216+116991]=0x339ba3c
> entry point at 0x200120
>
> [ using 244684 bytes of bsd ELF symbol table ]
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>        The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2011 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 5.0 (SOEKRIS4521) #0: Wed Nov  2 12:07:42 MDT 2011
>
> root at i386.builder:/obj/SOEKRIS4521
> cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 ("AuthenticAMD" 486-class)
> cpu0: FPU
> real mem  = 66646016 (63MB)
> avail mem = 12173312 (11MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 20/31/19, BIOS32 rev. 0 @ 0xf7840
> pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
> pcibios0: pcibios_get_intr_routing - function not supported
> pcibios0: PCI IRQ Routing information unavailable.
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc8000/0xa000
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0
> steppi>
> gpio0 at elansc0: 32 pins
> cbb0 at pci0 dev 9 function 0 "TI PCI1410 CardBus" rev 0x02: irq 10
> sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq
> 11, 8
> nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
> sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq
> 5, a9
> nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 1 device 0 cacheline 0x10, lattimer 0x3f
> pcmcia0 at cardslot0
> isa0 at mainbus0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> wdc0 at isa0 port 0x1f0/8 irq 14
> wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFH-004G>
> wd0: 1-sector PIO, LBA48, 3815MB, 7813120 sectors
> wd0(wdc0:0:0): using BIOS timings
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>
> Any suggestion is welcome.
>
> Regards.
>
> Éric Boudrand
>
>
> _______________________________________________
> flashboot mailing list
> flashboot at mindrot.org
> https://lists.mindrot.org/mailman/listinfo/flashboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mindrot.org/pipermail/flashboot/attachments/20120131/4359e340/attachment.html>