[flashboot] Booting with 5.0 image

[Stuart Henderson]

Looks a bit like there's no getty running on the serial port..
Do you get further if you boot into single-user mode?


On 2012/01/31 12:36, Eric Boudrand wrote:
> Hi,
> 
> I have tested SOEKRIS4521-50.image on a Soekris NET4511. The boot
> sequence failed with this log :
> 
> boot>                                                                           
> booting hd0a:/bsd: 53407060+463132 [61+127216+116991]=0x339ba3c                 
> entry point at 0x200120                                                         
>                                                                                 
> [ using 244684 bytes of bsd ELF symbol table ]                                  
> Copyright (c) 1982, 1986, 1989, 1991, 1993                                      
>         The Regents of the University of California.  All rights reserved.      
> Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org   
>                                                                                 
> OpenBSD 5.0 (SOEKRIS4521) #0: Wed Nov  2 12:07:42 MDT 2011                      
> 
> root at i386.builder:/obj/SOEKRIS4521                                          
> cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 ("AuthenticAMD" 486-class)             
> cpu0: FPU                                                                       
> real mem  = 66646016 (63MB)                                                     
> avail mem = 12173312 (11MB)                                                     
> mainbus0 at root                                                                
> bios0 at mainbus0: AT/286+ BIOS, date 20/31/19, BIOS32 rev. 0 @ 0xf7840         
> pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000                                    
> pcibios0: pcibios_get_intr_routing - function not supported                     
> pcibios0: PCI IRQ Routing information unavailable.                              
> pcibios0: PCI bus #1 is the last bus                                            
> bios0: ROM list: 0xc8000/0xa000                                                 
> cpu0 at mainbus0: (uniprocessor)                                                
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)                             
> elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0 steppi>
> gpio0 at elansc0: 32 pins                                                       
> cbb0 at pci0 dev 9 function 0 "TI PCI1410 CardBus" rev 0x02: irq 10             
> sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 11, 8
> nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1                             
> sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 5, a9
> nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1                             
> cardslot0 at cbb0 slot 0 flags 0                                                
> cardbus0 at cardslot0: bus 1 device 0 cacheline 0x10, lattimer 0x3f             
> pcmcia0 at cardslot0                                                            
> isa0 at mainbus0                                                                
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo                         
> com0: console                                                                   
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo                         
> pckbc0 at isa0 port 0x60/5                                                      
> pckbd0 at pckbc0 (kbd slot)                                                     
> pckbc0: using irq 1 for kbd slot                                                
> wskbd0 at pckbd0: console keyboard                                              
> wdc0 at isa0 port 0x1f0/8 irq 14                                                
> wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFH-004G>                             
> wd0: 1-sector PIO, LBA48, 3815MB, 7813120 sectors                               
> wd0(wdc0:0:0): using BIOS timings                                               
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16   
> 
> Any suggestion is welcome.
> 
> Regards.
> 
> Éric Boudrand
> 
> 
> _______________________________________________
> flashboot mailing list
> flashboot at mindrot.org
> https://lists.mindrot.org/mailman/listinfo/flashboot