Problem ssh: Permission denied

[Jose Luis Marin Perez]

Dear Sirs,

I have installed openssh-3.1p1 in a RedHat-7.1 server (By default
openssh-2.5.2), I have not problem in the installation but when
treatment to login to this server leaves the following message to me:

root at 192.168.100.1's password:
Permission denied (publickey,password,keyboard-interactive).

I have seen the file sshd_config and if this qualified so that it can
enter like root.

I have initiated sshd in debug mode, and I as much enclose to this mail
logs to you of the client as of the server.

That I can do?

Thanks
Jose Luis
-------------- next part --------------

[root at olidata /]# ssh -v -v -v 192.168.100.1
OpenSSH_3.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f
debug1: Reading configuration data /usr/local/etc/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: restore_uid
debug1: ssh_connect: getuid 0 geteuid 0 anon 1
debug1: Connecting to 192.168.100.1 [192.168.100.1] port 22.
debug1: temporarily_use_uid: 0/0 (e=0)
debug1: restore_uid
debug1: temporarily_use_uid: 0/0 (e=0)
debug1: restore_uid
debug1: Connection established.
debug1: read PEM private key done: type DSA
debug1: read PEM private key done: type RSA
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.1p1
debug1: match: OpenSSH_3.1p1 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.1p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 123/256
debug1: bits set: 1559/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: filename /usr/local/etc/ssh_known_hosts
The authenticity of host '192.168.100.1 (192.168.100.1)' can't be established.
RSA key fingerprint is 9e:4b:75:ab:4a:c9:ca:5b:a1:2f:00:50:85:85:30:62.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.100.1' (RSA) to the list of known hosts.
debug1: bits set: 1589/3191
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: next auth method to try is publickey
debug1: try privkey: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: try privkey: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: try privkey: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: next auth method to try is keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: 
debug3: authmethod_is_enabled password
debug1: next auth method to try is password
root at 192.168.100.1's password: 
debug1: packet_send2: adding 48 (len 61 padlen 19 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
Permission denied, please try again.
root at 192.168.100.1's password: 
debug1: packet_send2: adding 48 (len 61 padlen 19 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
Permission denied, please try again.
root at 192.168.100.1's password: 
debug1: packet_send2: adding 48 (len 61 padlen 19 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: no more auth methods to try
Permission denied (publickey,password,keyboard-interactive).
debug1: Calling cleanup 0x8061d70(0x0)
-------------- next part --------------
debug1: sshd version OpenSSH_3.1p1
debug1: private host key: #0 type 0 RSA1
debug3: Not a RSA1 key file /usr/local/etc/ssh_host_rsa_key.
debug1: read PEM private key done: type RSA
debug1: private host key: #1 type 1 RSA
debug3: Not a RSA1 key file /usr/local/etc/ssh_host_dsa_key.
debug1: read PEM private key done: type DSA
debug1: private host key: #2 type 2 DSA
socket: Address family not supported by protocol
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
Generating 768 bit RSA key.
RSA key generation complete.
debug1: Server will not fork when running in debugging mode.
Connection from 192.168.100.253 port 1332
debug1: Client protocol version 2.0; client software version OpenSSH_3.1p1
debug1: match: OpenSSH_3.1p1 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-1.99-OpenSSH_3.1p1
[root at firewall /]# sshd -d -d -d
debug1: sshd version OpenSSH_3.1p1
debug1: private host key: #0 type 0 RSA1
debug3: Not a RSA1 key file /usr/local/etc/ssh_host_rsa_key.
debug1: read PEM private key done: type RSA
debug1: private host key: #1 type 1 RSA
debug3: Not a RSA1 key file /usr/local/etc/ssh_host_dsa_key.
debug1: read PEM private key done: type DSA
debug1: private host key: #2 type 2 DSA
socket: Address family not supported by protocol
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
Generating 768 bit RSA key.
RSA key generation complete.
debug1: Server will not fork when running in debugging mode.
Connection from 192.168.100.253 port 1333
debug1: Client protocol version 2.0; client software version OpenSSH_3.1p1
debug1: match: OpenSSH_3.1p1 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-1.99-OpenSSH_3.1p1
debug1: list_hostkey_types: ssh-rsa,ssh-dss
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
debug1: dh_gen_key: priv key bits set: 135/256
debug1: bits set: 1598/3191
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
debug1: bits set: 1581/3191
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: KEX done
debug1: userauth-request for user root service ssh-connection method none
debug1: attempt 0 failures 0
debug2: input_userauth_request: setting up authctxt for root
debug2: input_userauth_request: try method none
Failed none for root from 192.168.100.253 port 1333 ssh2
debug1: userauth-request for user root service ssh-connection method keyboard-interactive
debug1: attempt 1 failures 1
debug2: input_userauth_request: try method keyboard-interactive
debug1: keyboard-interactive devs 
debug1: auth2_challenge: user=root devs=
debug1: kbdint_alloc: devices ''
debug2: auth2_challenge_start: devices 
Failed keyboard-interactive for root from 192.168.100.253 port 1333 ssh2
debug1: userauth-request for user root service ssh-connection method password
debug1: attempt 2 failures 2
debug2: input_userauth_request: try method password
Failed password for root from 192.168.100.253 port 1333 ssh2
debug1: userauth-request for user root service ssh-connection method password
debug1: attempt 3 failures 3
debug2: input_userauth_request: try method password
Failed password for root from 192.168.100.253 port 1333 ssh2
debug1: userauth-request for user root service ssh-connection method password
debug1: attempt 4 failures 4
debug2: input_userauth_request: try method password
Failed password for root from 192.168.100.253 port 1333 ssh2
Connection closed by 192.168.100.253
debug1: Calling cleanup 0x8065278(0x0)
-------------- next part --------------
#	$OpenBSD: sshd_config,v 1.48 2002/02/19 02:50:59 deraadt Exp $

# This is the sshd server system-wide configuration file.  See sshd(8)
# for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /usr/local/etc/ssh_host_key
# HostKeys for protocol version 2
#HostKey /usr/local/etc/ssh_host_rsa_key
#HostKey /usr/local/etc/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 3600
#ServerKeyBits 768

# Logging
#obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 600
#PermitRootLogin yes
#StrictModes yes

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile	.ssh/authorized_keys

# rhosts authentication should not be used
#RhostsAuthentication no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# For this to work you will also need host keys in /usr/local/etc/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
# KerberosAuthentication automatically enabled if keyfile exists
#KerberosAuthentication yes
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes

# AFSTokenPassing automatically enabled if k_hasafs() is true
#AFSTokenPassing yes

# Kerberos TGT Passing only works with the AFS kaserver
#KerberosTgtPassing no

# Set this to 'yes' to enable PAM keyboard-interactive authentication 
# Warning: enabling this may bypass the setting of 'PasswordAuthentication'
#PAMAuthenticationViaKbdInt yes

#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#KeepAlive yes
#UseLogin no

#MaxStartups 10
# no default banner path
#Banner /some/path
#VerifyReverseMapping no

# override default of no subsystems
Subsystem	sftp	/usr/local/libexec/sftp-server